TEXTURES: MONTH #253

"texture welded early in the morning heavy with thoughts about my father political radicalism and managing the whole texture okay despite all the bent pieces and with the left top poorly connected"


 TEXTURES: MONTH #254

"quite okay texture with only a poorly connected piece in the middle and also welding a piece on the top right and realizing that the welding itself has pushed it up of a few millimeters having to fill all the gap and likely having to grind the top edge later on"


 TEXTURES: MONTH #255

"wasting a lot of time on this texture especially on one small piece to the left not fitting and in the end grinding a corner and solving the problem like that also with one piece on the top left poorly connected and bending upward"


 TEXTURES: MONTH #256

"welding some bent pieces and generally having troubles to assemble this texture and also welding a long rusted piece slowly so as to avoid a lot of the jumps the pistol does when hitting too much rust"


 TEXTURES: MONTH #257

"texture with left and right side poorly connected and also one small piece at the bottom not well connected and having to also stop to go pee"


 TEXTURES: MONTH #258

"texture not so well connected in certain parts but overall holding well together with just a piece on the top left bent after attaching it to another bent piece causing a piece on the other side to be uneven"


 TEXTURES: MONTH #259

"two sides poorly connected with one another also beginning to get bubbles on the weld due to an increase lack of gas also with a bit of bending and a small piece i had to hammer down so as to fit in"


 TEXTURES: MONTH #260

"texture very concentrated on the right side and welding without any issues put some bothering stomach acidity anyway resolved to finish the gas bottle to then on monday bike to pick a new one"


 TEXTURES: MONTH #261

"complex texture but well united together with a long piece in the bottom i had to scratch quite a lot to get rid of all the rust prior welding"


 TEXTURES: MONTH #262

"once again pushing up a piece on the top when welding it and most certainly will have to crop it at the time of the installation in the project museum beside that doing a pretty neat job with only the top right corner poorly connected"


 TEXTURES: MONTH #263

"okay texture with a small piece hanging on the top right and having to hammer in another piece on the top left not fitting"


 TEXTURES: MONTH #264

"sturdy texture only starting welding the wrong piece and having to break it up just on time putting the correct piece and saving the situation seamlessly"


 TEXTURES: MONTH #265

"welding after dinner still thinking much of my father sad neo nazi pride and doing quite a good job making the texture sturdy but for the top left corner poorly connected"


 TEXTURES: MONTH #266

"fairly good texture only hard to weld on the rusted piece below and with august calling me but being unable to answer and getting back to the texture finalizing it pretty fine but for a small piece only connected at the corners"


 TEXTURES: MONTH #267

"biking for four hours to fetch a new gas bottle on the other side of the river and falling dead asleep in the afternoon putting silvester to bed but then installing the bottle and welding up this texture with only two poorly connected pieces on the left side and some porosity on the right due to welding previously without gas"


 TEXTURES: MONTH #268

"texture divided in two parts poorly connected and also with still some porosity trying to find the minimum gas level to weld with so i can make a whole bottle last until the end"


 TEXTURES: MONTH #269

"finishing the wire and replacing it smoothly to then get back welding this texture but for some reason unable to get gas through causing quite some porosity on the left side but generally producing a quite strong texture"


 TEXTURES: MONTH #270

"texture difficult to assemble with many bent pieces already from the start and slowly working my way through them with the end the top left corner poorly connected and still an itchy throat despite all the air purifying gears"


 TEXTURES: MONTH #271

"trying to weld before taking over the kids with myrthe working also during the main national holiday and finding still issues with the gas not blowing out properly causing some initial porosity and also a piece on the left being almost a centimeter shorter and adjusting it so as to not be too visible"


 TEXTURES: MONTH #272

"weak texture poorly connected from left to right but other than that fairly easy to weld together without issues but thinking whether the metal net supporting the textures in the museum should be kept inside or outside"


 TEXTURES: MONTH #273

"despite the shape texture quite well welded together with no issue just feeling heavy about my decision to make with the nets that will support it"


 TEXTURES: MONTH #274

"welding this last texture prior taking over the kids and having no issues but one small piece on the top right poorly connected"


 TEXTURES: MONTH #275

"welding feeling completely lost whether how to orient the net supporting the textures and feeling quite burnt out after considering all possibilities making quite a solid texture difficult to assemble with several bent pieces"


 TEXTURES: MONTH #276

"texture with many long pieces making it sturdy but difficult to weld being them all rusted"


 TEXTURES: MONTH #277

"left and right side of this texture disconnected but still smoothly assemble and weld all the pieces without any bent ones giving me troubles"


 TEXTURES: MONTH #278

"struggling a lot with this texture with a big gap to fill on the left side and also a poorly connected piece on the upper right"


 TEXTURES: MONTH #279

"with my neighbour complaining about the noise of the fume aspirator having to change the whole ventilation set up bringing the aspirator back out but this time having issues with the light having to reposition it and find a new setup at last managing with an okay texture only weak in a cross like shape poorly connected in the top"


 TEXTURES: MONTH #280

"assembling this texture with both the left and the right side not so well levelled but then using some badly cut pieces and reaching a fairly good level on the top only later when in italy ready to weld all the textures together realizing to have made a mistake with the top right five centimeters too much to the left and having to break it open and weld it again"


 TEXTURES: MONTH #281

"going smooth with this texture finding no issues but a bit hard to weld on the top right with the new light and ventilation set up nonetheless now breathing less fumes"


 TEXTURES: MONTH #282

"texture with several pieces of thirty centimeters not properly cut with some being way too short but nonetheless managing well with only one small piece on the top left poorly connected"


 TEXTURES: MONTH #283

"feeling a little sloppy welding a day spent with the kids and using a bent piece at the bottom having to flatten all the other pieces but managing well despite the whole top left corner standing isolated without any connections"


 TEXTURES: MONTH #284

"finding it a bit hard welding the longer pieces a bit rusted but nonetheless managing well beside one a small piece on the top poorly connected and a lower one at the bottom left completely disconnected"


 TEXTURES: MONTH #285

"setting up this texture with some challenges and later adding a bent piece on the top causing the whole top right corner to bent up"


 TEXTURES: MONTH #286

"sturdy texture without major issues but some badly cut small pieces giving some leveling issues"


 TEXTURES: MONTH #287

"very gray day with a neighbour daughter babysitting the kids and putting up this texture with no problems also with new filters to my mask and just a bit worry i did not get the right amount of pieces from the chinese metal supplier"


 TEXTURES: MONTH #288

"texture with two long pieces with some rust a bit hard to weld on and also two small pieces on the top left poorly connected"